Inflator System · Tek Power Units

Power X01 Pro

Combines a wraparound overmold and continuous outer geometry with First-Generation Piston Architecture, Threaded Bush retention, and Seated Seal Exhaust for direct, firm, deliberate control.

Actuation Core:Metal

Mount standard · Corrugated hose interface: Type 23 · 23.6 mm (0.93 in) Type 25 · 25.4 mm (1.00 in)

Be notified when this product becomes available.

Join the waitlist

HYDPRO Power X01 Pro power unit, three-quarter view with smooth wraparound body and HP port

Tech diver entering the water from a boat, then cave diving along a guideline

Power X01 Series

X01 Series Core. Wraparound overmold, continuous outer geometry.

System configurations

Metal Actuation Core

Built around precision machined metal alloy buttons and internal components, this configuration is engineered for high structural strength and impact resistance. Designed for heavy duty use, it delivers mechanical reliability and long term durability in demanding operational conditions.

Technopolymer Actuation Core

Engineered with high performance polymer buttons and internal components, this configuration is designed to maintain stable operation in low temperature conditions. Highly resistant to scale and encrustation, it ensures consistent mechanical performance and efficiency under intensive use.

Non-Magnetic Actuation Core

Built around high-performance polymers and selected non-magnetic metal alloys, this configuration is developed for qualified special applications. Supplied on a program basis: magnetic signature, materials, and validation are defined by each project's requirements.

Power X01 Pro: round-touch 19mm button, first-gen piston, 150-275 l/m inflation, 80-275 l/m exhaust, threaded-bush inlet

Specifications

Direct response. Firm actuation.

Built around First-Generation Piston Architecture, Threaded Bush inlet retention and Seated Seal Exhaust, X01 delivers a firm, deliberate control feel with repeatable response over long-cycle use.

Full technical specs (PDF)

Extended Mount Compatibility

Engineered for cross-platform integration, HYDPRO Power Units are available in T23 and T25 Mount Standards, specifically configured for 23.6 mm (0.93 in) and 25.4 mm (1.00 in) corrugated hoses.

Built to integrate. True to your setup.

Whatever the field runs, HYDPRO builds to it natively: every established mount standard, thread, and host geometry, covered from the factory. Your setup stays as it is, integration stays clean, and the response repeats: the same command, the same result, on every dive.

Italian engineering. Predictable control.

Each HYDPRO device is engineered and manufactured in Italy: one chain from raw material to release. Polymer families are selected for constant immersion, precision-drawn brass runs on in-house CNC lines, and every device leaves built, tested, and signed off under one roof.

HYDPRO power unit manufacturing: CNC machining, hand assembly, and the finished valve underwater

Proven by divers.
Refined by decades.

Four decades in the water stand behind the current generation. What wears, what binds, what drifts out of tune comes back from real dives to the bench, and the next revision answers it. Control you can feel, refined one generation at a time.